3D terrain

[Aisriyth]

Love the stuff, likely going to place an order in a few weeks for my gaming group!

Also, as far as weapons, personally I'd stick to in universe weapon looks. That is just me though, others might disagree and want different looking weapons then the stock issued.

[Pierzasty]

These are the 40mm markers that Paradiso requires, at a minimum.

This is wrong. Cervantes helpfully provided extra markers to save paper, but the campaign doesn't require as many.

List of Campaign Paradiso markers required
(this is assuming that the missions will be played one at a time, if you want to run several different missions on different tables consult the quote at the end of the post and update your numbers accordingly.)
I went through every mission and wrote down the requirements. I provide a description if you want to make alternative markers different from what MAS makes.

Unless stated otherwise, all markers/devices are human-made.

2x Console A - a computer terminal used to switch/destroy as an objective. MAS variants B and C differ only by holoscreen color; you can make different models, different replaceable holoscreens with a basic computer or simply paint colored stripes/markings on them signifying varied security clearance.
4x Console B - see above
1x Console C - see above
2x Alien Console A - a Tohaa-made computer terminal used as an objective. MAS variants B and C differ only by holoscreen color; you can make different models, different replaceable holoscreens with a basic computer or simply paint colored energy conduits in different colors, signifying varied security clearance.
2x Alien Console B - see above
2x Alien Console C - see above
5x Alien Tech - an unrecognizable, alien-made (Tohaa or T'zechi) device that's accessed as an objective. Should look suitably high-tech, non-human and strong enough to be able to last a couple hundred years on the planet.
10x Elevator - an open elevator platform, 40mm wide, capable of ascending to a higher level(in fluff only). Needs to be open to accomodate TAGs/REMs and because it's stated that it doesn't provide any cover (MAS fail ).
4x Security REM - a stationary sentry gun that hides under a floor hatch when not in use. Think Starcraft base mission sentry turrets.
4x Wide Gate - a 50mm wide flat strip on the floor, marking an entrance. It is important that it allows 40mm bases through but not the Maghariba
2x Narrow Gate - a 30mm wide flat strip on the floor, marking an entrance. It is important that it allows 25mm bases through but not 40mm or bigger.
6x Transmission Antenna - some kind of long-range transmitter. May be a landing beacon or a tracking antenna.
1x Train-Cab A - you can find these on http://www.infinitythegame.com/infinity ... Maglev.pdf . Both train cabs should reflect the size/shape of the walls (especially the position of the train's computer).
1x Train-Cab B - see above. This can be a copy, as both end cars are virtually identical, except for the markings.
1x Train Cargo Car - see link above. It has to be the same size/shape.
6x Train Container Containers randomly placed on the train car. Are the size/shape of an iKube (100 mm long, 50 mm wide, 42 mm high). The size is important and cannot be exceeded, as they'll be stacked closely.
12x Crash Coffin - a landed one-man escape pod from a space craft.
4x Tech Coffin - a one-man launch pod or decontamination chamber, depending on mission. MAS models them as intact variant of Crash Coffin.


List of required markers by mission:

Prologue 1:
none

Prologue 2:
1x Console A
1x Console B

101:
3x Alien Tech

102:
5x Alien Tech

103:
1x Alien Tech
2x Alien Console A
2x Wide Gate

201:
none

202:
10x Elevator
4x Security REM
2x Narrow Gate
2x Console A
4x Console B
1x Console C? (Main console marker not stated)

203:
1x Trans. Antenna

204:
1x Console A
6x Trans. Antenna

205:
8x Elevator
2x Console A
1x Train-Cab A
1x Tran-Cab B
1x Train Wagon
6x Train Container
(alternatively, 2x Wide Gate)

301:
1x Console A
2x Console B
2x Wide Gate

302:
12x Crash Coffin

303:
2x Console A
2x Tech Coffin
2x Wide Gate

401:
4x Narrow Gate
2x Elevator
1x Alien Console A
2x Alien Console B
2x Alien Console C

402:
2x Wide Gate
4x Tech Coffin

403:
1x Alien Tech
Debris Templates as needed (the size of circular templates)

[Paulson]

Rough concept for a cryo bed. It still needs some more refinement but thought I'd get some opinions.

[VeronaKid]

Fantastic! Love the console addition at the end. Very nice detailing.

[kidterminal]

I like it.

[Sihook]

Loving the look of your designs, the cryo bed looks high tech and practical.

I just received my order of multiples of each of your previous designs and I'm impressed with the quality of the terrian. The little stickers are an added bonus as well.

[Paulson]

Glad you like them I saw your army when I was looking over Pan-O color schemes very nice work and I'd love to see how the pieces look when you have them painted up.

[Sihook]

Glad you like them I saw your army when I was looking over Pan-O color schemes very nice work and I'd love to see how the pieces look when you have them painted up.

Thanks. I put together the Soda machines last night, the resin you use is very easy to work with and had very little flash. I'm just thinking up some Futuristic soda brands, I'm thinking of going with "Coke 2.0" and "Shadowclad Energy Drink" as a homage to an Infinity forum member who passed away recently. His user name will forever grace my gaming table.

[Locksmith]

Starting our Paradiso campaign, just placed a big order for all the terminals we'll need. Looking forward to getting the stuff, the pics look great.

Also: my response to the cryo bed is shut up and take my money. It looks sweet.

[valthonis]

Personally I'm not too interested in extra weapons, but love the work on the scatter terrain! Although if you want some ideas, feel free to look at those markers Cervantes3773 posted and pick any of those!

Top three I'm interested:
-Tech Coffin (or something usable as such)
-Alien Console (perhaps just a second model of the computer terminal)
-Security Drone!

Please keep up the excellent work on scatter terrain, I will be buying a bunch as soon as my tax return comes in!

[Lampyridae]

Rough concept for a cryo bed. It still needs some more refinement but thought I'd get some opinions.

The "tech coffin" is a 25mm marker that sits in a corner, so you'd be best off making it able to stand on its foot. But otherwise I quite like it!

[Locksmith]

Got my order, thanks for the extras!

[Pierzasty]

Extras? What extras?

[Crushar]

Yep, I got my order as well! I got extras too!!!

Thank you Paul!

[Paulson]

You're welcome guys

Sometimes extras happen for a variety of reasons, sometimes I have some spares left over, or one of the other casts might not be perfect and I throw it in with an order rather than toss it out. Ocassionally I get a large order and add a few extra copies of the small pieces just because.


I've gotten a bit sidetracked wuith getting new renders done. The last couple weeks I've been working on my own game system. I'll get the cryo bed and a couple new pieces together hopefully by the end of march.

If you guys want to take a peek at my mecha game here's a link: http://www.dakkadakka.com/dakkaforum/po ... 09439.page

[Scarecrow]

Im looking forward to seeing more of that Mecha Front game! The concept art looks awesome! I was considering Wild West Exodus as a new game, but i may now hold off to see what this does!

[Sihook]

I've been following the Mech front concepts and fluff on Facebook and I've gotta say I'm impressed and looking forward to getting my hands (and paint!) on some of those mechs. I love the idea that you're doing them in 15mm so that they'll have a real presence on the tabletop and the right size to do some interesting paint jobs on them.