And now for something completely different...
71 posts
• Page 2 of 3 • 1, 2, 3
I always wonder when I look buildings for Infinity, how do models go up from floor to floor, I think you guys should strongly consider an elevator shaft that is modular to your buildings and the ability to add extra levels to it, appropriate to the building it's attached to.
There is an elevator shaft modelled inside in one corner. (some kind of futuristic gravity lift 
) I play it that 1 short movement order takes a miniature 1 floor up or down. 
Also, the engraving on the side panels could be used as a ladder.
Yes, I forgot to mention, the flat roof with Air-Con unit will also be available as an add-on set.
Yes, I plan to make a corner L-shaped building next and after that, sure, I can do a T-shaped building.
) I play it that 1 short movement order takes a miniature 1 floor up or down. Also, the engraving on the side panels could be used as a ladder.Yes, I forgot to mention, the flat roof with Air-Con unit will also be available as an add-on set.
Yes, I plan to make a corner L-shaped building next and after that, sure, I can do a T-shaped building.
Laser Cut Wargaming Terrain
www.systemagaming.com
www.systemagaming.com
Are the new sets going to compatible with my existing Base-o sets? Height of floors and roofs, ladders?
I notice that on one side of the roof wall there is a removable opening will we be able to connect the base-O walkways to the sets?
Looks fabulous BTW.
I notice that on one side of the roof wall there is a removable opening will we be able to connect the base-O walkways to the sets?
Looks fabulous BTW.
RedDragon wrote:There is an elevator shaft modelled inside in one corner. (some kind of futuristic gravity lift
Maybe wuji thought it was a shower.
If not worth saving, is it worth rewriting? What is more, was it worth writing?
- Mob of Blondes
- Posts: 1591
- Joined: January 31st, 2013, 11:13 pm
- Has liked: 1 time
- Been liked: 198 times
No, the heights don't match up. But I'm already thinking about an add-on set with stairs that will work with the Base-0 Walkway sets.
Laser Cut Wargaming Terrain
www.systemagaming.com
www.systemagaming.com
Regarding the elevator idea (something I've often thought about with my MAS buildings), I couldn't help but notice that the doorways along the short wall all line up nicely; seems to me that some kind of MDF/acrylic shaft could be added to this side of the building to look the part as an 'official'/obvious elevator system....
Alright, I've created the idea, now somebody else needs to run with it. Sigh, the burden of being both creative and lazy.
Alright, I've created the idea, now somebody else needs to run with it. Sigh, the burden of being both creative and lazy.
I wonder if the customeeple starlift elevator (40mm bases with bits hanging over) will fit in the spots, where the elevators are positioned. I guess just painting the spots will suffice, but maybe I'll end up wanting some extra oomph.
I assume there is no elevator in the SGS range anytime soon?
I assume there is no elevator in the SGS range anytime soon?
-
CoveredInFish - Posts: 200
- Joined: June 29th, 2013, 6:38 pm
- Location: Germany, Bonn
- Has liked: 287 times
- Been liked: 82 times
Mob of Blondes wrote:RedDragon wrote:There is an elevator shaft modelled inside in one corner. (some kind of futuristic gravity lift
Maybe wuji thought it was a shower.
I did think it was a shower. I just really want actual elevators and stair cases as a part of Infinity buildings. It's more believable for me at least.
RedDragon wrote:No, the heights don't match up. But I'm already thinking about an add-on set with stairs that will work with the Base-0 Walkway sets.
Good, the additional ladders and rails you did for the base-O were great. Any additional add-on's like this, to aid compatibility, will be greatly appreciated!
wuji wrote:I did think it was a shower. I just really want actual elevators and stair cases as a part of Infinity buildings. It's more believable for me at least.
No worries, I like Red Harvest's buildings for, among other things, those touches. At first even I wondered about the showers, but once I saw so many, with no other bathroom things and near desks, I went for elevator markers.
If not worth saving, is it worth rewriting? What is more, was it worth writing?
- Mob of Blondes
- Posts: 1591
- Joined: January 31st, 2013, 11:13 pm
- Has liked: 1 time
- Been liked: 198 times
So, here are some more previews - acrylic banners!
Here are 2 variants - oriental and middle-eastern. But all together there will be 4 variants - oriental (Chinese and Japanese), middle-eastern (Arabic), western (English) and Alien. Each variant will have 2 different designs.
Each set of banners will include 6 banners (enough for 2 buildings) - 1 large horizontal banner, 1 large vertical banner, 2 small horizontal banners for the front facade and 2 for the back facade. The set will cost 12€.
And of course they'll be available in the 3 standard colours, orange, blue and green.
Here are 2 variants - oriental and middle-eastern. But all together there will be 4 variants - oriental (Chinese and Japanese), middle-eastern (Arabic), western (English) and Alien. Each variant will have 2 different designs.
Each set of banners will include 6 banners (enough for 2 buildings) - 1 large horizontal banner, 1 large vertical banner, 2 small horizontal banners for the front facade and 2 for the back facade. The set will cost 12€.
And of course they'll be available in the 3 standard colours, orange, blue and green.
Laser Cut Wargaming Terrain
www.systemagaming.com
www.systemagaming.com
Yep! That looks truly amazing! 
Great photos!
Great photos!
Oh man ... I see a large order incomin. 
-
CoveredInFish - Posts: 200
- Joined: June 29th, 2013, 6:38 pm
- Location: Germany, Bonn
- Has liked: 287 times
- Been liked: 82 times
You did well on those signs, Scorch.
Looking good! Will those banners fit the base-0 sets as well?
-
el_presidente - Posts: 186
- Joined: September 9th, 2014, 10:50 am
- Has liked: 12 times
- Been liked: 43 times
They're not directly designed for the Base-0 range, but with a craft knife and a bit of glue it shouldn't be to difficult to make them fit somewhere.
Laser Cut Wargaming Terrain
www.systemagaming.com
www.systemagaming.com
Hi,
I'm sorry it's taking a bit longer than I said, but there is just a lot to do before I can put the new products online. But I think the sets will finally be ready by the end of next week.
In the meantime I'm giving you a small preview of another little set to accompany the buildings - a little garden!
And, as you can see, the new range will be called Futura City.
I'm sorry it's taking a bit longer than I said, but there is just a lot to do before I can put the new products online. But I think the sets will finally be ready by the end of next week.
In the meantime I'm giving you a small preview of another little set to accompany the buildings - a little garden!
And, as you can see, the new range will be called Futura City.
Laser Cut Wargaming Terrain
www.systemagaming.com
www.systemagaming.com
Oh man! I am exited for this range. That garden looks so great. Makes for a good urban vibe!
-
CoveredInFish - Posts: 200
- Joined: June 29th, 2013, 6:38 pm
- Location: Germany, Bonn
- Has liked: 287 times
- Been liked: 82 times
Now to keep myself from stealing that idea! 
They say there will be Heaven and the Fount of Kausar,
That there, there will be pure wine and honey and sugar
Fill up the wine cup and place it in my hand
(For) ready cash is better than a thousand credits.
- Rubayyat of Omar Khayyam, but it is a shoddy translation
That there, there will be pure wine and honey and sugar
Fill up the wine cup and place it in my hand
(For) ready cash is better than a thousand credits.
- Rubayyat of Omar Khayyam, but it is a shoddy translation
Errhile wrote:Now to keep myself from stealing that idea!
I'd say go nuts.
There is no suitable player base here for that, despite Nuts! being a nifty lil' game (I tried it back in the day - it even does have a kind of ARO mechanic)
But I guess I'll steal the idea shamelessly for my Cardbuilding stuff!
But I guess I'll steal the idea shamelessly for my Cardbuilding stuff!
They say there will be Heaven and the Fount of Kausar,
That there, there will be pure wine and honey and sugar
Fill up the wine cup and place it in my hand
(For) ready cash is better than a thousand credits.
- Rubayyat of Omar Khayyam, but it is a shoddy translation
That there, there will be pure wine and honey and sugar
Fill up the wine cup and place it in my hand
(For) ready cash is better than a thousand credits.
- Rubayyat of Omar Khayyam, but it is a shoddy translation
The new buildings are now in the store...
-
CoveredInFish - Posts: 200
- Joined: June 29th, 2013, 6:38 pm
- Location: Germany, Bonn
- Has liked: 287 times
- Been liked: 82 times
So sweet. I shared them on the Data Sphere Facebook. I really like how their banners turned out!
It's a great line and I guess I'll order a bug bunch next week.
I saw your Facebook share and wondered why there is nothing in the forum yet:)
I saw your Facebook share and wondered why there is nothing in the forum yet:)
-
CoveredInFish - Posts: 200
- Joined: June 29th, 2013, 6:38 pm
- Location: Germany, Bonn
- Has liked: 287 times
- Been liked: 82 times
I was away for the weekend and didn't manage to put in on the forum yet, but the new sets are now available!
I’ve written a blog post about the Futura City range if you’d like to read more about it.
http://www.systemagaming.com/product-sp ... utura-city
I’ve written a blog post about the Futura City range if you’d like to read more about it.
http://www.systemagaming.com/product-sp ... utura-city
Laser Cut Wargaming Terrain
www.systemagaming.com
www.systemagaming.com
My order just came in - whow - that was quick. Great. Stuff looks cool, as soon as I have time to assemble it I'll post pictures and/or a review.
-
CoveredInFish - Posts: 200
- Joined: June 29th, 2013, 6:38 pm
- Location: Germany, Bonn
- Has liked: 287 times
- Been liked: 82 times
Great! Don't forget to check out the assembly instructions if you need them: http://www.systemagaming.com/assembly-guides
The Futura City sets are a bit more complicated than Base-0.
The Futura City sets are a bit more complicated than Base-0.
Laser Cut Wargaming Terrain
www.systemagaming.com
www.systemagaming.com
RedDragon wrote:I was away for the weekend and didn't manage to put in on the forum yet, but the new sets are now available!
I’ve written a blog post about the Futura City range if you’d like to read more about it.
http://www.systemagaming.com/product-sp ... utura-city
Great stuff! I particularly like the side gardens.
I'll be ordering some soon!
These city pieces look really tempting...
Were there any thoughts on an indoor or outdoor stairwell (fire escape style) which could go on the end? Could be cool to play on too.
Looking forward to how the L and T shapes turn out.
Were there any thoughts on an indoor or outdoor stairwell (fire escape style) which could go on the end? Could be cool to play on too.
Looking forward to how the L and T shapes turn out.
71 posts
• Page 2 of 3 • 1, 2, 3